Product SKUs | |
| |
SSG-6039P-E1CR16H | SuperStorage 6039P-E1CR16H (Black) | |
| | |
Motherboard | |
| |
Super X11DPH-T | |
| | |
Processor/Cache | |
| |
CPU | Dual Socket P (LGA 3647) | |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable
Processors‡, | |
3 UPI up to 10.4GT/s | |
Support CPU TDP 70-205W | |
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel®
Xeon® Scalable processors (codenamed Cascade Lake-R) | |
| | |
System Memory | |
| |
Memory Capacity | 16 DIMM slots | |
Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM | |
Supports Intel® Optane™ DCPMM†† | |
Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory
purchased from Supermicro | |
†† Cascade Lake only. Contact your Supermicro sales rep for more
info. | |
| | |
On-Board Devices | |
| |
Chipset | Intel® C622 chipset | |
SAS | SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID | |
RAID 0, 1, 5, 6, 10, 50, 60 | |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 | |
Network Controllers | Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557 | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
Graphics | ASPEED AST2500 BMC | |
| | |
Input / Output | |
| |
LAN | 2 RJ45 10GBase-T LAN ports | |
1 RJ45 Dedicated IPMI LAN port | |
USB | 4 USB 3.0 ports (rear) | |
1 Type A | |
VGA | 1 VGA port | |
Serial Port / Header | 1 Fast UART 16550 port / 1 Header | |
| | |
System BIOS | |
| |
BIOS Type | 256Mb AMI UEFI | |
| | |
Management | |
| |
Software | Intel® Node Manager | |
IPMI 2.0 | |
NMI | |
SPM, SUM | |
SuperDoctor® 5 | |
Watchdog | |
| | |
PC Health Monitoring | |
| |
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. | |
4+1 Phase-switching voltage regulator | |
FAN | Fans with tachometer monitoring | |
Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | |
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | |
| |
Chassis | |
| |
Form Factor | 3U Rackmount | |
Model | CSE-836BE1C-R1K23B | |
| | |
Dimensions | |
| |
Width | 17.2" (437mm) | |
Height | 5.2" (132mm) | |
Depth | 25.5" (648mm) | |
Weight | Gross Weight: 79 lbs (35.8 kg) | |
Net Weight: 48 lbs (21.8 kg) | |
Available Colors | Black | |
| | |
Front Panel | |
| |
Buttons | Power On/Off button | |
System Reset button | |
LEDs | Power status LED | |
Hard drive activity LED | |
Network activity LEDs | |
System Information LED | |
Power fail LED | |
| | |
Expansion Slots | |
| |
PCI-Express | 3 PCI-E 3.0 x16 slot | |
4 PCI-E 3.0 x8 slots | |
Slot 2 & 3 occupied by controller and JBOD Expansion Port | |
| | |
Drive Bays | |
| |
Hot-swap | 16 Hot-swap 3.5" SAS3/SATA3 drive bays | |
Optional | 2 Optional Onboard NVMe M.2 | |
| | |
Backplane | |
| |
SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots
and 2x mini-SAS HD connectors for JBOD expansion | |
| | |
System Cooling | |
| |
Fans | 3 Hot-swap 8cm redundant PWM cooling fans | |
2 Hot-swap 8cm rear exhaust PWM fans | |
Redundant cooling | |
| | |
Power Supply (76mm Width) | |
| |
1200W Redundant Power Supplies with PMBus | |
Total Output Power | 1000W/1200W | |
Dimension | 76 x 40 x 336 mm | |
(W x H x L) | |
Input | 100-127Vac / 15-12A / 50-60Hz | |
200-240Vac / 8.5-7A / 50-60Hz | |
200-240Vdc / 8.5-7A (for CCC only) | |
+12V | Max: 83A / Min: 0A (100-127Vac) | |
Max: 100A / Min: 0A (200-240Vac) | |
Max: 100A / Min: 0A (200-240Vdc) | |
+5Vsb | Max: 4A / Min: 0A | |
Output Type | 19 Pairs Gold Finger Connector | |
Certification | Titanium Level | |
| |
[ Test Report ] | |
| | |
Operating Environment |
| |
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: | |
10°C ~ 35°C (50°F ~ 95°F) | |
Non-operating Temperature: | |
-40°C to 60°C (-40°F to 140°F) | |
Operating Relative Humidity: | |
8% to 90% (non-condensing) | |
Non-operating Relative Humidity: | |
5% to 95% (non-condensing) | |
